Tag Archives:

thermowood siding

Installing Thermally Modified Wood Siding.

Thermally modified wood siding can be fastened using different installation methods but I suggest that you follow the manufacturers recommended installation guidelines. I recently visited a job site in Burlington, Ontario where the contractor was installing the thermally modified wood siding on a private residence and the contractors took some time to explain their installation […]

Penofin for Thermally Modified Wood will prevent greying for up to 2 years

Penofin® for Thermally Modified Wood is a deep-penetrating, acrylic stain delivering unmatched durability and protection from weathering. Penofin for Thermally Modified Wood is designed to provide a protective water and UV resistant coating that preserves the rich exotic color of thermally modified wood. Penofin for Thermally Modified Wood will prevent greying for up to 2 […]

Testing of thermally modified wood plays an important role.

One should not overlook the fact that to properly bring a product to the marketplace it needs to be tested not only once but several times over and on a continual basis. With a natural wood product the requirement for testing is even greater. Thermally modified wood was introduced and developed to eliminate some of […]

Is Thermally Modified Wood Here to Stay?

Is Thermally Modified Hardwood Lumber Here To Stay?

What product should I use to glue thermally modified wood.

I was wondering that exact same thing until I came across a product called ProBond Max. It works great and is readily available here in the Canadian marketplace. I picked up my bottle at my local Home Hardware store. Gluing thermally modified wood can pose some issues. I found that the processing time needed for […]

Application of Cutek Extreme on Thermally Modified Woods.

The roasting & steam process creates a very appealing initial look to woods.  However, these woods will now silver in record time, are far more brittle, and they can aggressively check & crack.  If thermally modified wood is left uncoated in Australia it will shift in color to something much lighter inside 7 days when […]

Application of Cutek Extreme Clear Coat on Thermally Modified Wood

Unusual wear patterns have been observed on thermally modified woods which are not typical of Cutek wear on regular woods. We are still not sure why pigment has not adhered in some areas, but the usual fade/wear pattern is not apparent.   It also appears that when too much coating/pigment has been applied, the result is […]

Improper wood preparation and over applying stains could pose an issue with thermally modified wood.

It has come to light recently that the extremely fine milling process used in the manufacture of thermally modified woods creates such a smooth surface that little in the way of coatings can adhere to.  Coatings need surface roughness to adhere for any length of time.  Tints that are available for example, with the Cutek […]

Thermally Modified Wood and Wildland Urban Interface (WUI)

WUI or what they call “Wildland Urban Interface” is a regulation that requires building products to comply with specific standards when used in the Wildland Urban Interface area as defined within the State of California building code.  For products to be used in the Wildland Urban Interface (WUI), there are some regulations that required building products […]

Education continues to play an important role with consumers wanting information on thermally modified wood.

Having access to a new and innovative product such as thermally modified wood requires continuing education to the North American consumer. Most consumers are not aware of the benefits of thermally treated wood over other traditional non thermally treated wood products such as spruce, pine, douglas fir, western red cedar or southern yellow pine. Thermally […]