Tag Archives:

cfp cladding and decking

4 Month Exposure Testing on Thermally Modified Wood

We used the Novawood thermally modified wood decking and did an exposure test that ran 4 months beginning at December 1 st, 2015 and ran until April 1st, 2016. The thermally treated wood was not treated with anything and was simply washed down with soap and water when the testing was initiated. As you can […]

New and innovative choice in thermally modified wood siding.

Exterior wood siding is making a big comeback in the North American marketplace. Your starting to see it utilized in both exterior and interior walls to help accent the remaining surroundings. Thermally modified wood siding deserves to be considered on many of these projects. Not only is it beautiful but also the process of thermally […]

Is LEED still relevant?

Is LEED still relevant? Source: Is LEED still relevant?

Factors affecting the quality of heat-treated wood.

The quality of raw material has a significant effect on the quality of the final heat-treated wood product. In principle, all wood species can be heat-treated. However, the parameters used for the process must be optimized separately for each wood species. In Finland, the species used for heat treatment are pine (Pinus sylvestris), spruce (Picea abies), birch (Betula […]

Thermally Modified Decking

This is a very informative article written by Charles Wardell from Professional Deck Builders Magazine about thermally modified wood with a product overview as a decking alternative to tropical hardwoods like Ipe including an overview of the Pros and Cons associated to the wood. Thermally modified wood, also called heat-treated wood, has been available since […]

How Durable is Thermally Modified Wood?

Expert opinions suggest that when you thermally modify wood it increases the durability rating of the wood significantly. Test reports on wood that has been thermally modified wood using North American Ash are given much better durability ratings compared to other wood species that have not been thermally modified. Durability is one of the key […]

Does thermally modified wood fade?

The simple answer is yes. There is not a natural exterior wood product that will not fade over time when being exposed to the suns UV rays. UV light has the most impact on color change. You only have to put a piece of unfinished wood out in direct sunlight for a short time with […]

The commitment to responsible harvesting for the benefit of future generations.

Thermally modified wood has been in the North American marketplace for several years but until recently it was never really accepted as a serious alternative to traditional construction materials due to the unknown’s about its origin and the technology associated with it. First attempts into the North American marketplace were simply not very successful for […]

What is thermally modified wood and what can it be used for?

We often hear the term but don’t really understand what it means. Its a process where wood is altered from its original makeup by using a combination of heat and steam with the absence of oxygen. This changes the cell structure of the wood in order to increase the woods durability. Lack of oxygen prevents […]

Why should you consider using thermally modified wood using the Thermowood method?

Our Novawood thermally modified wood has a variety of end uses that can enhance your living area whether it be indoor our outdoor. Novawood remains natural and beautiful after the thermal modification process has taken place but also it has many additional qualities that sometime get overlooked. The products treated with the Thermowood method are; […]