I was wondering that exact same thing until I came across a product called ProBond Max. It works great and is readily available here in the Canadian marketplace. I picked up my bottle at my local Home Hardware store. Gluing thermally modified wood can pose some issues. I found that the processing time needed for […]
The roasting & steam process creates a very appealing initial look to woods. However, these woods will now silver in record time, are far more brittle, and they can aggressively check & crack. If thermally modified wood is left uncoated in Australia it will shift in color to something much lighter inside 7 days when […]
Unusual wear patterns have been observed on thermally modified woods which are not typical of Cutek wear on regular woods. We are still not sure why pigment has not adhered in some areas, but the usual fade/wear pattern is not apparent. It also appears that when too much coating/pigment has been applied, the result is […]
Thermally treated wood products are made from several species of wood. One common species used in thermal modification is North American White Ash as this species is very easy to work with when it comes to installing either the decking or siding products. Ash is considered a joinery wood and is used commonly in the […]
What you can learn from a few professionals while working along side them can be beneficial no matter how inept one may feel to the task at hand. The opportunity presented itself so I jumped at it and was very surprised that what you see from the outside of a finished home is often meticulously […]
Improper wood preparation and over applying stains could pose an issue with thermally modified wood.
It has come to light recently that the extremely fine milling process used in the manufacture of thermally modified woods creates such a smooth surface that little in the way of coatings can adhere to. Coatings need surface roughness to adhere for any length of time. Tints that are available for example, with the Cutek […]
WUI or what they call “Wildland Urban Interface” is a regulation that requires building products to comply with specific standards when used in the Wildland Urban Interface area as defined within the State of California building code. For products to be used in the Wildland Urban Interface (WUI), there are some regulations that required building products […]
I must say that when I tried the Cutek Extreme wood preservative on my pc. of weathered thermally modified wood decking the results were amazing. I applied the Cutek Exteme after washing down the deck boards with soap and water then I let dry. I then applied two coats of the Cutek and I used […]
Having access to a new and innovative product such as thermally modified wood requires continuing education to the North American consumer. Most consumers are not aware of the benefits of thermally treated wood over other traditional non thermally treated wood products such as spruce, pine, douglas fir, western red cedar or southern yellow pine. Thermally […]