Unusual wear patterns have been observed on thermally modified woods which are not typical of Cutek wear on regular woods. We are still not sure why pigment has not adhered in some areas, but the usual fade/wear pattern is not apparent. It also appears that when too much coating/pigment has been applied, the result is […]
What you can learn from a few professionals while working along side them can be beneficial no matter how inept one may feel to the task at hand. The opportunity presented itself so I jumped at it and was very surprised that what you see from the outside of a finished home is often meticulously […]
Improper wood preparation and over applying stains could pose an issue with thermally modified wood.
It has come to light recently that the extremely fine milling process used in the manufacture of thermally modified woods creates such a smooth surface that little in the way of coatings can adhere to. Coatings need surface roughness to adhere for any length of time. Tints that are available for example, with the Cutek […]
Having access to a new and innovative product such as thermally modified wood requires continuing education to the North American consumer. Most consumers are not aware of the benefits of thermally treated wood over other traditional non thermally treated wood products such as spruce, pine, douglas fir, western red cedar or southern yellow pine. Thermally […]
We used the Novawood thermally modified wood decking and did an exposure test that ran 4 months beginning at December 1 st, 2015 and ran until April 1st, 2016. The thermally treated wood was not treated with anything and was simply washed down with soap and water when the testing was initiated. As you can […]
Exterior wood siding is making a big comeback in the North American marketplace. Your starting to see it utilized in both exterior and interior walls to help accent the remaining surroundings. Thermally modified wood siding deserves to be considered on many of these projects. Not only is it beautiful but also the process of thermally […]
Is LEED still relevant? Source: Is LEED still relevant?
The quality of raw material has a significant effect on the quality of the final heat-treated wood product. In principle, all wood species can be heat-treated. However, the parameters used for the process must be optimized separately for each wood species. In Finland, the species used for heat treatment are pine (Pinus sylvestris), spruce (Picea abies), birch (Betula […]
Expert opinions suggest that when you thermally modify wood it increases the durability rating of the wood significantly. Test reports on wood that has been thermally modified wood using North American Ash are given much better durability ratings compared to other wood species that have not been thermally modified. Durability is one of the key […]