Thermally modified wood siding can be fastened using different installation methods but I suggest that you follow the manufacturers recommended installation guidelines. I recently visited a job site in Burlington, Ontario where the contractor was installing the thermally modified wood siding on a private residence and the contractors took some time to explain their installation […]
Had the pleasure of recently traveling the roadways of Washington and Montana State with two of Specialty Forest Products salespeople. The purpose of my trip was to listen to what Specialty Forest Products dealer customers had to say about thermally modified wood products and how the product would be received in the eyes of the […]
The roasting & steam process creates a very appealing initial look to woods. However, these woods will now silver in record time, are far more brittle, and they can aggressively check & crack. If thermally modified wood is left uncoated in Australia it will shift in color to something much lighter inside 7 days when […]
What you can learn from a few professionals while working along side them can be beneficial no matter how inept one may feel to the task at hand. The opportunity presented itself so I jumped at it and was very surprised that what you see from the outside of a finished home is often meticulously […]
Improper wood preparation and over applying stains could pose an issue with thermally modified wood.
It has come to light recently that the extremely fine milling process used in the manufacture of thermally modified woods creates such a smooth surface that little in the way of coatings can adhere to. Coatings need surface roughness to adhere for any length of time. Tints that are available for example, with the Cutek […]
I must say that when I tried the Cutek Extreme wood preservative on my pc. of weathered thermally modified wood decking the results were amazing. I applied the Cutek Exteme after washing down the deck boards with soap and water then I let dry. I then applied two coats of the Cutek and I used […]
We used the Novawood thermally modified wood decking and did an exposure test that ran 4 months beginning at December 1 st, 2015 and ran until April 1st, 2016. The thermally treated wood was not treated with anything and was simply washed down with soap and water when the testing was initiated. As you can […]
Is LEED still relevant? Source: Is LEED still relevant?