Tag Archives:

thermally modified wood

Lunch and Learns with Professional Specifiers help them understand thermally modified wood.

Like any product in the construction marketplace it needs to be properly explained so the product can have the opportunity to be specified into construction projects. Thermally modified wood is no different and when the opportunity presents itself CFP Cladding & Decking staff are more than happy to provide learning seminars with the professional specifiers. […]

Specialty Forest Products distributor of thermally modified wood gets retailers opinions.

Had the pleasure of recently traveling the roadways of Washington and Montana State with two of Specialty Forest Products salespeople. The purpose of my trip was to listen to what Specialty Forest Products dealer customers had to say about thermally modified wood products and how the product would be received in the eyes of the […]

Is Thermally Modified Wood Here to Stay?

Is Thermally Modified Hardwood Lumber Here To Stay?

Application of Cutek Extreme on Thermally Modified Woods.

The roasting & steam process creates a very appealing initial look to woods.  However, these woods will now silver in record time, are far more brittle, and they can aggressively check & crack.  If thermally modified wood is left uncoated in Australia it will shift in color to something much lighter inside 7 days when […]

Application of Cutek Extreme Clear Coat on Thermally Modified Wood

Unusual wear patterns have been observed on thermally modified woods which are not typical of Cutek wear on regular woods. We are still not sure why pigment has not adhered in some areas, but the usual fade/wear pattern is not apparent.   It also appears that when too much coating/pigment has been applied, the result is […]

Why use end sealer on thermally treated wood.

Thermally treated wood products are made from several species of wood. One common species used in thermal modification is North American White Ash as this species is very easy to work with when it comes to installing either the decking or siding products. Ash is considered a joinery wood and is used commonly in the […]

Hardwood siding installation using thermally modified wood.

What you can learn from a few professionals while working along side them can be beneficial no matter how inept one may feel to the task at hand. The opportunity presented itself so I jumped at it and was very surprised that what you see from the outside of a finished home is often meticulously […]

Improper wood preparation and over applying stains could pose an issue with thermally modified wood.

It has come to light recently that the extremely fine milling process used in the manufacture of thermally modified woods creates such a smooth surface that little in the way of coatings can adhere to.  Coatings need surface roughness to adhere for any length of time.  Tints that are available for example, with the Cutek […]

Thermally Modified Wood and Wildland Urban Interface (WUI)

WUI or what they call “Wildland Urban Interface” is a regulation that requires building products to comply with specific standards when used in the Wildland Urban Interface area as defined within the State of California building code.  For products to be used in the Wildland Urban Interface (WUI), there are some regulations that required building products […]

How does thermally modified wood accept oil based stains.

I must say that when I tried the Cutek Extreme wood preservative on my pc. of weathered thermally modified wood decking the results were amazing. I applied the Cutek Exteme after washing down the deck boards with soap and water then I let dry. I then applied two coats of the Cutek and I used […]