Tag Archives:

novawood siding

Where can I buy North American thermally modified lumber?

I recently visited a North American sawmill located in the Province of Ontario, the company name was Cherry Forest Products. Apparently they are one of Ontario’s largest lumber producing hardwood sawmills. I was provided a company tour by Jacob Baranski, the company Vice President and he showed me some lumber that had been thermally modified […]

Water Absorption and Stability Test on Thermally Modified Wood

I received some samples of thermally modified wood and proceeded to test them for water absorption as I had been told that properly dried thermally modified wood will not allow active water to remain in the wood like other non-thermally modified wood products which in theory should make the thermally modified wood more stable and […]

What is torrefied wood?

The technology consists of heating the wood at a very high temperature (from 190 C to 240 C), in a torrefaction kiln (autoclave) at controlled atmosphere and low in oxygen. The length of the process, as well as the temperature degree sustained during a determined period, depends on the species and the desired color. This […]

Can I get thermally modified wood FSC certified for LEED building?

The short answer is yes. I found a supplier in Canada, Cherry Forest Products, which distributes to both Canada and the United States and their thermally modified wood decking and siding products are FSC Certified and they provided me proof of their certification by showing me their current certificate which is issued by the Forest […]

Specialty Forest Products distributor of thermally modified wood gets retailers opinions.

Had the pleasure of recently traveling the roadways of Washington and Montana State with two of Specialty Forest Products salespeople. The purpose of my trip was to listen to what Specialty Forest Products dealer customers had to say about thermally modified wood products and how the product would be received in the eyes of the […]

What product should I use to glue thermally modified wood.

I was wondering that exact same thing until I came across a product called ProBond Max. It works great and is readily available here in the Canadian marketplace. I picked up my bottle at my local Home Hardware store. Gluing thermally modified wood can pose some issues. I found that the processing time needed for […]

Application of Cutek Extreme on Thermally Modified Woods.

The roasting & steam process creates a very appealing initial look to woods.  However, these woods will now silver in record time, are far more brittle, and they can aggressively check & crack.  If thermally modified wood is left uncoated in Australia it will shift in color to something much lighter inside 7 days when […]

Improper wood preparation and over applying stains could pose an issue with thermally modified wood.

It has come to light recently that the extremely fine milling process used in the manufacture of thermally modified woods creates such a smooth surface that little in the way of coatings can adhere to.  Coatings need surface roughness to adhere for any length of time.  Tints that are available for example, with the Cutek […]

Thermally Modified Wood and Wildland Urban Interface (WUI)

WUI or what they call “Wildland Urban Interface” is a regulation that requires building products to comply with specific standards when used in the Wildland Urban Interface area as defined within the State of California building code.  For products to be used in the Wildland Urban Interface (WUI), there are some regulations that required building products […]

How does thermally modified wood accept oil based stains.

I must say that when I tried the Cutek Extreme wood preservative on my pc. of weathered thermally modified wood decking the results were amazing. I applied the Cutek Exteme after washing down the deck boards with soap and water then I let dry. I then applied two coats of the Cutek and I used […]