It has come to light recently that the extremely fine milling process used in the manufacture of thermally modified woods creates such a smooth surface that little in the way of coatings can adhere to. Coatings need surface roughness to adhere for any length of time. Tints that are available for example, with the Cutek […]
WUI or what they call “Wildland Urban Interface” is a regulation that requires building products to comply with specific standards when used in the Wildland Urban Interface area as defined within the State of California building code. For products to be used in the Wildland Urban Interface (WUI), there are some regulations that required building products […]
I must say that when I tried the Cutek Extreme wood preservative on my pc. of weathered thermally modified wood decking the results were amazing. I applied the Cutek Exteme after washing down the deck boards with soap and water then I let dry. I then applied two coats of the Cutek and I used […]
Having access to a new and innovative product such as thermally modified wood requires continuing education to the North American consumer. Most consumers are not aware of the benefits of thermally treated wood over other traditional non thermally treated wood products such as spruce, pine, douglas fir, western red cedar or southern yellow pine. Thermally […]
We used the Novawood thermally modified wood decking and did an exposure test that ran 4 months beginning at December 1 st, 2015 and ran until April 1st, 2016. The thermally treated wood was not treated with anything and was simply washed down with soap and water when the testing was initiated. As you can […]
The quality of raw material has a significant effect on the quality of the final heat-treated wood product. In principle, all wood species can be heat-treated. However, the parameters used for the process must be optimized separately for each wood species. In Finland, the species used for heat treatment are pine (Pinus sylvestris), spruce (Picea abies), birch (Betula […]
This is a very informative article written by Charles Wardell from Professional Deck Builders Magazine about thermally modified wood with a product overview as a decking alternative to tropical hardwoods like Ipe including an overview of the Pros and Cons associated to the wood. Thermally modified wood, also called heat-treated wood, has been available since […]
Expert opinions suggest that when you thermally modify wood it increases the durability rating of the wood significantly. Test reports on wood that has been thermally modified wood using North American Ash are given much better durability ratings compared to other wood species that have not been thermally modified. Durability is one of the key […]
The simple answer is yes. There is not a natural exterior wood product that will not fade over time when being exposed to the suns UV rays. UV light has the most impact on color change. You only have to put a piece of unfinished wood out in direct sunlight for a short time with […]