Tag Archives:

oil based stains

Application of Cutek Extreme Clear Coat on Thermally Modified Wood

Unusual wear patterns have been observed on thermally modified woods which are not typical of Cutek wear on regular woods. We are still not sure why pigment has not adhered in some areas, but the usual fade/wear pattern is not apparent.   It also appears that when too much coating/pigment has been applied, the result is […]

Improper wood preparation and over applying stains could pose an issue with thermally modified wood.

It has come to light recently that the extremely fine milling process used in the manufacture of thermally modified woods creates such a smooth surface that little in the way of coatings can adhere to.  Coatings need surface roughness to adhere for any length of time.  Tints that are available for example, with the Cutek […]

How does thermally modified wood accept oil based stains.

I must say that when I tried the Cutek Extreme wood preservative on my pc. of weathered thermally modified wood decking the results were amazing. I applied the Cutek Exteme after washing down the deck boards with soap and water then I let dry. I then applied two coats of the Cutek and I used […]

Does thermally modified wood fade?

The simple answer is yes. There is not a natural exterior wood product that will not fade over time when being exposed to the suns UV rays. UV light has the most impact on color change. You only have to put a piece of unfinished wood out in direct sunlight for a short time with […]